Independent learning resources on product and industrial design: the design process, hardware prototyping, design for manufacturing and portfolios.https://nuspb.org/https://nuspb.org/blog/3d-printing-vs-cnc-prototyping/https://nuspb.org/blog/3d-printing-vs-cnc-prototyping/Compare 3D printing and CNC machining for prototypes by quantity, material, tolerance, geometry and iteration speed, with a stage-by-stage decision flow and enclosure examples.Wed, 07 Oct 2026 00:00:00 GMThttps://nuspb.org/blog/alpla-mono-material-foam-pump/https://nuspb.org/blog/alpla-mono-material-foam-pump/What ALPLA announced about its metal-free polypropylene foam pump, what a product designer can learn from it, and which claims still need checking before anyone relies on them.Wed, 07 Oct 2026 00:00:00 GMThttps://nuspb.org/blog/aptar-beauty-l-occitane-pump/https://nuspb.org/blog/aptar-beauty-l-occitane-pump/What Aptar announced about its custom pump for L'Occitane's refillable hand care range, what changed on the Satine platform, and what a designer can and cannot learn from it.Wed, 07 Oct 2026 00:00:00 GMThttps://nuspb.org/blog/aptar-novus-advance-pump/https://nuspb.org/blog/aptar-novus-advance-pump/What Aptar announced about the Novus Advance full-polyolefin cosmetic pump, which claims carry conditions, what a designer can learn from it and what is still unconfirmed.Wed, 07 Oct 2026 00:00:00 GMThttps://nuspb.org/blog/industrial-design-portfolio-guide/https://nuspb.org/blog/industrial-design-portfolio-guide/How to build an industrial design portfolio: what each project page needs, layout and cover page, school vs internship versions, official upload rules and a copyable page template.Wed, 07 Oct 2026 00:00:00 GMThttps://nuspb.org/blog/injection-molding-design-rules/https://nuspb.org/blog/injection-molding-design-rules/Injection molding design rules with sourced values: wall thickness by plastic, rib and boss proportions, draft angles, corner radii, a molder's tolerance and a pre-drawing checklist.Wed, 07 Oct 2026 00:00:00 GMThttps://nuspb.org/blog/rapid-prototyping-3d-printing/https://nuspb.org/blog/rapid-prototyping-3d-printing/How to run a rapid prototyping loop with 3D printing: the five steps, how FDM, SLA and SLS compare for prototypes, which fidelity each stage needs, and what drives cost.Wed, 07 Oct 2026 00:00:00 GMT